牌号简介 About |
---|
NO2G-00是一种低熔融流速、高冲击共聚物聚丙烯,适用于片材挤出和厚壁注射成型应用。与具有相似熔体流动速率范围的竞争性抗冲共聚物相比,它提供了很好的刚度和抗冲强度平衡。典型应用包括家电、汽车、复合材料、消费品、家庭用品和刚性包装。好处包括增强冲击力和刚度。该材料符合21 CFR 177.1520中规定的美国食品药品管理局的要求。 N02G-00 is a low melt flow rate, high-impact copolymer polypropylene for sheet extrusion and thick wall injection molding applications. It offers a superior balance of stiffness and impact strength as compared to competitive impact copolymers of similar melt flow rate range. Typical applications include appliances, automotive, compounding, consumer products, housewares, and rigid packaging. Benefits include enhanced impact and stiffness. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
2.5 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-20℃,注塑成型 -20 ℃, injection molding |
8.20 | kJ/m² | ASTM D256 |
-20℃,注塑成型 -20 ℃, injection molding |
85 | J/m | ASTM D256 |
23℃,注塑成型 23 ℃, injection molding |
无断裂 | ASTM D256 | |
装有测量仪表的落镖冲击 Dart impact equipped with measuring instruments |
ASTM D3763 | ||
-20℃,注塑,韧性破坏 -20 ℃, injection molding, toughness failure |
ASTM D3763 | ||
23℃,注塑,韧性破坏 23 ℃, injection molding, toughness failure |
ASTM D3763 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火,注塑成型 0.45 MPa, unannealed, injection molded |
℃ | ASTM D648 | |
1.8 MPa,未退火,注塑 1.8 MPa, unannealed, injection molded |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
|||
60° 60° |
ASTM D2457 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength 3 |
ASTM D638 | ||
屈服,注塑成型 Yield, injection molding |
MPa | ASTM D638 | |
断裂,注塑成型 Fracture, injection molding |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 3 |
ASTM D638 | ||
屈服,注塑成型 Yield, injection molding |
% | ASTM D638 | |
断裂,注塑成型 Fracture, injection molding |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
1% 正割,注塑成型 1% cut, injection molding |
MPa | ASTM D790-A |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
【新闻资讯】查看全部
资本涌入,混战红海,监管后电子烟能走多远?
2019-08-05 7月26日,世界卫生组织最新发布的《2019年全年烟草流行报告》中,重点提及 电子烟 的健康风险,并呼吁各国政府加强监管。 7月22日国家卫健委规划司司长毛群安在22日举行的新闻发布 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |