牌号简介 About |
---|
聚合多元醇212-20是一种由环氧丙烷和二氧化碳制成的2000分子量聚合物。它是一种无定形的线性脂肪族聚碳酸酯二醇。二氧化碳约占多元醇质量的40%。用途:聚合多元醇212-20是一种无溶剂、高粘度的建筑砌块,适用于各种聚氨酯系统。它可用于制备粘合剂、泡沫、涂料、弹性体和TPU。特点:脂肪族聚碳酸酯骨干提供独特的高性能聚氨酯在强度和环境阻力方面。在粘合剂应用中,它提供了改进的粘合剂和粘合强度和水解稳定性。在涂层中,它具有抗紫外线和高硬度。它大大提高了柔性泡沫的承载力、拉伸强度和撕裂强度。它还可以提高耐磨性。 Converge polyol 212-20 is a 2000 molecular weight polymer produced from propylene oxide and carbon dioxide. It is an amorphous, linear, aliphatic polycarbonate diol. Carbon dioxide accounts for approximately 40% of the polyol mass. Applications: Converge polyol 212-20 is a solvent-free, high viscosity building block for a variety of polyurethane systems. It can be used in the preparation of adhesives, foams, coatings, elastomers and TPUs. Features: The aliphatic polycarbonate backbone delivers unique high performance to polyurethanes in terms of both strength and environmental resistance. In adhesive applications, it provides improved adhesive & cohesive strength and hydrolyti c stability. In coatings, it delivers UV resistance and high hardness. It substantially increases the load bearing, tensile, and tear strength of fl exible foams. It can also improve abrasion resistance. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.20 | g/cm³ | ISO 1183 |
分子量 molecular weight |
2000 | g/mol | |
含水量 water content |
< 1000 | ppm | |
酸值 acid value |
< 0.50 | Mg KOH/g | |
粘度 viscosity |
|||
75℃ 75℃ |
100 | Pa·s | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Functionality Functionality |
|||
OH Value OH Value |
Mg KOH/g | ||
Polydispersity Polydispersity |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
注塑模具中常有气体排出的缘由
2016-06-29 注塑模具中常常有气体产生,可能和以下几点有关。 (1)浇注系统与模具型腔中存有的空气。 (2)有些原料含有没有被干燥排除的水分,它们在高温下会气化成水蒸气。 (3)由于在注塑时温度太高,某些性质不稳定的塑料会发生分解而产生气体。 (4)塑料原料中的某些添加剂挥发或者相互化学反应生成的气体。 2、同时排气不良不畅的缘由,也需要尽快找出来。注塑模的排气不良也给塑件带来了困扰。主要表现如下: (1)在 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |