牌号简介 About |
---|
30%玻璃纤维增强,抗水解,聚对苯二甲酸丁二醇酯 PAA 4000 is a 40% reinforced aromatic nylon copolymer. It has very high stiffness and strength similar to PPA. It can be processed in water heated tools and provides excellent surface finish. It is commonly used in metal and die cast replacement applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.48 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
ASTM D955 | ||
MD MD |
0.20 | % | ASTM D955 |
TD TD |
0.95 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.55 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
221 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
ASTM D638 | ||
屈服 yield |
% | ASTM D638 | |
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
因利润暴跌,亚洲最大的苯乙烯生产商—韩华道达尔宣布减产80%!
2021-11-19 搜料网资讯: 由于利润过低,亚洲最大的 苯乙烯 生产商韩华道达尔决定临时降低位于韩国忠清南道瑞山市大山石化园区(Daesan)的苯乙烯单体装置负荷程度。 该公司称此次降负荷约在2成 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |