牌号简介 About |
---|
PC/ABS混合物,注射成型级,具有优异的机械性能,平衡度高达-40°C。VICAT B120=120°C优点:高流动性,高冲击性,高达-40°C,低发射级,紫外线稳定级,即使在高湿度条件下也具有良好的稳定性,低收缩性,良好的可涂性,薄壁零件化学成分:热塑性聚合物基于聚碳酸酯(PC)和丙烯腈-丁二烯-苯乙烯(ABS)的混合物。 PC/ABS blend, injection molding grade with excellent mechanical properties balance up to -40°C. Vicat B120 = 120°C Benefits: High flow Very high impact up to -40°C Low emission grade UV stabilized grade Good stability even with high humidity conditions Low shrinkage Good paintability Thin-walled parts Chemical Composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadiene-styrene (ABS). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
25℃ 25℃ |
1.11 | g/cm³ | ISO 1183 |
熔体体积流动速率 Melt Volume Rate |
|||
260℃,5 kg 260℃,5 kg |
21.0 | cm³/10min | ISO 1133 |
收缩率 Shrinkage rate 2 |
|||
TD TD |
0.65 to 0.75 | % | ISO 294-4 |
MD MD |
0.65 to 0.75 | % | ISO 2577 |
吸水率 Water absorption rate |
|||
饱和,23℃ Saturation, 23 ℃ |
0.70 | % | ISO 62 |
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
% | ISO 62 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ISO 527-1-2 | |
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
MPa | ISO 527-2/50 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ISO 527-2/50 | |
弯曲模量 Bending modulus 3 |
|||
23℃ 23℃ 3 |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180/1A | ||
-40℃ -40℃ |
kJ/m² | ISO 180-1A | |
-30℃ -30℃ |
kJ/m² | ISO 180-1A | |
23℃ 23℃ |
kJ/m² | ISO 180-1A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,退火 1.8 MPa, annealed |
℃ | ISO 75-2/A | |
0.45 MPa,退火 0.45 MPa, annealed |
℃ | ISO 75-2/B | |
维卡软化温度 Vicat Softening Temp |
|||
B120 B120 |
℃ | ISO 306/B120 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
TD:23~55℃ TD:23~55℃ |
1/℃ | ISO 11359-2 | |
MD:23~55℃ MD:23~55℃ |
1/℃ | ISO 11359-2 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
1.60 mm 1.60 mm |
UL 94 | ||
燃烧速率 Burning rate 4 |
mm/min | ISO 3795 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 60x60x2mm |
3 0.079 in/min |
4 150x105x1 mm |
【新闻资讯】查看全部
德国人如何对待塑料包装
2018-03-26 德国人如何看待塑料包装 德国人是如何看待可持续发展以及塑料包装?在2018年2月德国包装协会e.V.对德国1050位年龄在16至64岁之间的不同行业的男女进行了调查。 根据调查显示,4.5%的受访者表示他们会在商店购买塑料购物袋。 18-24岁年龄组的比例为11.4%,几乎是其余人口的三倍(3.55%),仍有19.1%的人表示他们必须从家中带上塑料手提袋。而更多的德国人(80.4%)选择使用购物筐或者布袋。 53.8%的市民要求不仅要收集和回 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |