牌号简介 About |
---|
填充聚丙烯化合物是通过将聚丙烯与细填料(即云母、粉笔、滑石、玻璃)混合而制成的。添加抗氧化剂、润滑剂、加工助剂和干燥剂等添加剂,以改善长期的热加工性能。直接使用或用所需等级的聚丙烯稀释的化合物在最终产品中显示出良好的可溶性和良好的性能平衡。化合物中的填充物具有某些对最终产品至关重要的重要特性。修改如下。 Filled Polypropylene compounds are manufactured by compounding Polypropylene with fine fillers (i.e. mica, chalk, talc, glass). Additives like antioxidants, lubricant, processing aid and desiccant are added to improve long term thermal and processability. The compounds used directly or diluted with desired grades of polypropylenes show good dispensability and excellent balance of properties in the ultimate product. The fillers in the compound incorporates certain important properties those are essential for ultimate product. The modification are as below. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.12 | g/cm³ | 内部方法 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
8.0 10 | g/10min | ASTM D1238 |
含水率 Moisture content |
< 600 | ppm | 内部方法 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
18.6 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
5.0 | % | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
四川省建立环境维护督察追责问责任务机制
2017-08-24 按照中央要求,督察地方党委和政府及其有关部门环保不作为、乱作为的情况,推动地方落实环境保护党政同责、一岗双责、严肃问责等工作机制是中央环保督察的工作重点。四川省坚决贯彻落实中央第五环境保护督察组关于追责问责工作的要求,加强政策研究,强化统筹指导,以严格的追责问责倒逼各地各部门提高环境保护问题整改质量,进一步增强群众获得感。 在把握政策上突出“稳”,根据中央有关精神和法律法规有关要求,四川省研究提出追责问责指导原则,明确政策界限,将大气污染治理、江河湖泊水质及出川断面水质、饮 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |