牌号简介 About |
---|
Isocor™ HW69SI是中等粘度的PA-610。这种树脂特别适用于需要低吸湿性和更大尺寸稳定性的应用。Isocor™ HW69SI也用于需要良好电绝缘性能的应用中。这种树脂可以用传统工艺加工。HW69Si的典型应用包括:电缆护套薄膜挤压单丝/刚毛汽车管电连接器 Isocor™ HW69SI is a medium viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Isocor™ HW69SI is also used in applications requiring good electrical insulation properties. This resin can be processed using conventional techniques. Typical applications for HW69SI include: cable jacketing film extrusions monofilaments / bristles automotive tubing electrical connectors |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.07 | g/cm³ | ASTM D792 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
60.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
100 | % | ASTM D638 |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
2000 | MPa | ASTM D790 |
泰伯磨损 Taber wear and tear |
6.0 | mg/1000cy | ASTM D1044 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔点 melting point |
℃ | ||
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
阿科玛打造全新第四代Multi50 持续扬帆启航
2018-04-23 过去5年来,阿科玛携其Multi50三体船参加帆船赛事,并于去年11月在Transat Jacques Vabre赛事中获胜。作为LalouRoucayrolLalou Multi团队的独家合作伙伴,阿科玛以其专有技术与材料打造的创新高性能船,在Multi50和Mini 6.50组赛事中大放异彩。目前,阿科玛集团决定建造一艘全新的Multi50,预计于2020年启航,目标是2022年的Route du Rhum赛事。 凭借在帆船赛事上的人力和技术优势,阿科玛承诺在接下来的四 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |