牌号简介 About |
---|
本产品是一种填充聚四氟乙烯化合物,由特殊等级的碳/石墨制成。颜色黑色。厚度范围为0.010至0.064。用于轴承应用。在水等潮湿环境中使用时,具有低摩擦和良好的磨损性能。 This product is a filled PTFE Compound made with special grades of Carbon/Graphite. Color Black. Manufactured in thickness range of 0.010 To 0.064. Used in bearing applications. Exhibits low friction and excellent wear properties when used in wet applications such as water. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
2.10 | g/cm³ | ASTM D792 |
Thickness Thickness |
0.380 到 1.63 | mm | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
12.4 | MPa | ASTM D1457 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
70 | % | ASTM D1457 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
ASTM D696 | ||
MD MD |
1.1E-4 | 1/℃ | ASTM D696 |
TD TD |
1/℃ | ASTM D696 | |
变形 deformation |
% | ASTM D621 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Core ID Core ID |
cm | ||
Width Width |
mm |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
这些橡胶塑料机械相关的国家标准将于2021年起实施
2020-12-30 搜料网资讯: GB/T 38533-2020 《橡胶塑料注射成型机 模具固定和联接尺寸》 实施日期:2021年2月1日 标准规定了橡胶塑料注射成型机模具的模具固定尺寸、模具固定孔和T型槽以及顶出孔, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |